Pumps & Water Systems

3 Way Fused Bilge Pump Switch Panel.  Ref15:  LA-31301                        N61

• Made From Quality Marine Grade INOX 316 Stainless Steel
• Water Resistant.
• Indication Light
• Durable Construction, Resistant to Harsh Conditions.
• Coated With Electrostac Paint
• Installation Guide
• Built-in fuse-holder included, with 10A Fuse.
• Mounting Screws
• Size: 70 x 65mm, Max.current - 10A, Voltage Range - 12 / 24 VDC

Attwood Panel Mounted Rocker Switch.  Ref17:  MA-7615-A3

Ideal for use with pump that draws 10 amps or less

• 1/4" Spade terminals
• 6V through 32V D.C only, 10 amps max
• Plate size: 2-13/16" x 1-7/8"
• Hole Size: 1-1/2" x 7/8"

Please note: Bilge pump switches are not external ignition protected

Attwood V Series Automatic Bilge Switch With Cover.  Ref17:  MA-4201-7

The Automatic Float Switch converts any bilge pump that draws 12 amps (at 12 VDC) or 6 amps (at 24 VDC) or less to fully automatic operation. It features a compact, low-profile design that mounts on any surface from horizontal up to a 24° angle. No large voltage drop which reduces bilge pump output like some reed switch designs. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume ignition and electrical shock. Contains no mercury, a "Persistent Toxic Substance" listed as a health hazard in more than 26 states.

Float switch installs independently or directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.

Attwood V Series Automatic Bilge Switch Without Cover.  Ref17:  MA-4202-7

The Automatic Float Switch converts any bilge pump that draws 12 amps (at 12 VDC) or 6 amps (at 24 VDC) or less to fully automatic operation. It features a compact, low-profile design that mounts on any surface from horizontal up to a 24° angle. No large voltage drop which reduces bilge pump output like some reed switch designs. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume ignition and electrical shock. Contains no mercury, a "Persistent Toxic Substance" listed as a health hazard in more than 26 states.

Float switch installs independently or directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.

Battery Operated Siphon Pump.  Ref18:  MZ-44001

Transfer fluids including petrol, diesel, kerosene, antifreeze, water and other non-corrosive liquids

3/4" component assembly consisting: Ball Valve in Marine Grade DZR, Marine Grade Bronze - Straight Hose Connector and Skin Fitting.            Z61

Marine Grade DZR Ball Valve
Full bore, compact construction and bottom loaded stem. It is a high quality product and is ideal specifically for water installations. Threads ISO 7/1 Rp F-F. Body and components are in a special dezincification, marine grade, copper alloy DZR (CR). Seals are in virgin PTFE. Handle steel lever with coloured plastic sleeve.

Marine Grade Bronze - Straight Hose Connector     
Manufactured in marine grade bronze with BSP male thread and hex shoulder. 

Marine Grade Bronze Skin Fitting
Through hull skin fitting moulded in marine grade bronze, with internal lugs for ease of securing. Complete with nut and washer, BSP thread.

Ball Valve 1-70902        Skin Fitting 2-70102        Hose Tail  1-78820

Electric Bilge Pump 3 Way Switch  - 12v.                Ref20: AAA-10296-12    J93

Manufactured from aluminium plate with a 3-way Auto-Off-Manual switch with spring return from manual position.

Ex-Display - No packaging.

Rule iL500 Plus In Line Submersible Pump 24V.          Ref: CW-iL500P-24     M50Z

Jabsco Compact Impeller Removal Tool - Up to 57mm.                 Ref19: CG-50070-0080

For Jabsco impellers diameters up to 57mm.

Jabsco Hot Water Circulation Compact Pump - 12v DC.             Ref20:  CW-59510-0012

Key Features:

• Connections: - for 19mm (¾”) bore hose
• Dimensions: - 97mm long, 100mm wide, 70mm high
• Fuse Size: 2(amp)
• Maximum Current: 1.2(amps)
• Output: - up to 12.5 litres/minute at 1.2m total head
• Compact, long life pump for hot water circulation
• Circulates water up to 100ºC
• Magnetic drive - no shaft seal to leak
• Continuously rated
• Supplied with mounting bracket 

Jabsco Hot Water Circulation Cyclone Pump.             Ref20: CW-50840-2012 (12V), CW-50840-2024 (24V)

Centrifugal 'Cyclone' pump non-self-priming. 

Key Features:

• Available in 12 or 24 Voltage
• Connections: - ¾”BSP internal threaded ports
• Dimensions: - 163mm long, 120mm wide, 122mm high
• Fuse Size: - 10(amp)
• Maximum Current: - 7(amps)
• Output: - 100 litres/minute (22 gallons/minute) @ 0.1m head
• High output, continuous rated centrifugal pump
• Robust stainless steel body
• Can be used with shut-off nozzle
• Non-self-priming, requires flooded suction
• Maximum recommended total head 4m
• Packaged Dimensions: L:24.00 x H:13.00 x W:18.00cm

Jabsco Hot Water Circulation Ecocirc Pump - 8 to 24v DC.             Ref20: CW-59520-0000B

Key Features:

• Connections: - ½” BSP
• Dimensions: - 90mm long, 82mm wide, 86mm high
• Fuse Size: 2(amp)
• Maximum Current: 1.7(amps)
• Output: - variable flow - 5 settings, see performance file
• Compact, long life pump for hot water circulation
• Circulates water up to 80ºC
• Magnetic drive - no shaft seal to leak
• Continuously rated
• Supplied with mounting bracket
• Non-corroding materials
• Voltage range from 8 to 24v DC
• Operates in system pressures up to 10 bar
• Suitable for hot water systems and water/glycol mixtures
• Packaged Dimensions: L:17.00 x H:13.00 x W:13.00cm

Jabsco Hot Water Circulation Pump - 8 to 24v DC.             Ref20: CW-59530-0000B

Key Features:

• Connections: - for 19mm (¾”) bore hose
• Dimensions: - 101mm long, 89mm wide, 104mm high
• Fuse Size: 2(amp)
• Maximum Current: 1.8(amps)
• Output: - variable flow - 5 settings, see performance file
• Compact, long life pump for hot water circulation
• Circulates water up to 80ºC
• Magnetic drive - no shaft seal to leak
• Continuously rated
• Supplied with mounting bracket
• Non-corroding materials
• Voltage range from 8 to 24v DC
• Handles aggressive liquids

Jabsco Impeller & Gasket Kit - 1210-0001-P.             Ref19: CG-1210-0001-P

Include Screws.

Jabsco Impeller & Gasket Kit - 1414-0001-P.             Ref19: CG-1414-0001-P

Include Screws.

Jabsco Impeller & Gasket Kit - 17937-0001-P.             Ref19: CG-17937-0001-P

Include Screws.

Jabsco Impeller & Gasket Kit - 18777-0001-P.             Ref19: CG-18777-0001-P

Include Screws.

Jabsco Impeller & Gasket Kit - 21414-0001-P.             Ref19: CG-21414-0001-P

Include Screws.

Jabsco Impeller & Gasket Kit - 22405-0001-P.             Ref19: CG-22405-0001-P

Include Screws.

Jabsco Impeller & Gasket Kit - 653-0001-P.             Ref19: CG-653-0001-P

Include Screws.

Jabsco Impeller & Gasket Kit - 673-0001-P.             Ref19: CG-673-0001-P

Include Screws.

Jabsco Impeller & Gasket Kit - 920-0001-P.             Ref19: CG-920-0001-P

Include Screws.

Jabsco Impeller Removal Tool - Up to 118mm.                 Ref19: CG-50070-0200

For Jabsco impellers diameters range from 200/270/370/470/500 size pumps.

Jabsco Impeller Removal Tool.                 Ref19: CG-50070-0040

For Jabsco impellers diameters up to 65mm.

Jabsco Odourlos Toilet Holding Tank Treatment Concentrate .         Ref16:  CW53            YS4

A blend of enzymes, friendly bacteria and surfactants, to break down waste in marine holding tanks

Jabsco Par Max 4 Self Priming Diaphragm Pump 24V.  For bilge pumping, shower drain or livewell circulation.  Ref:  CW-31705-0094                       M55

Johnson Pump Impeller - MC97 (F35B) With Glycerine - Large.      Ref19: AF-09-808B-1

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - MC97 (F35B) With Glycerine - Small.        Ref19: AF-09-806B-1

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - MC97 (F4B) With Glycerine - Large.      Ref19: AF-09-1026B-1

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - MC97 (F4B) With Glycerine - Small.      Ref19: AF-09-810B-1

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - MC97 (F4B-11) With Glycerine.      Ref19: AF-09-824P-1

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - MC97 (F5B) With Glycerine.          Ref19: AF-09-1027B-1

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - MC97 (F6B-9) With Glycerine.          Ref19: AF-09-812B-1

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - MC97 (F75) With Thread.           Ref19: AF-09-821BT-1

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - MC97 (F7B).           Ref19: AF-09-1028BT-1

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - Neoprene (F5B).          Ref19: AF-09-801B

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - Neoprene (F8B).           Ref19: AF-09-819B

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - Neoprene (F95).           Ref19: AF-09-820B

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - Neoprene (F9B).           Ref19: AF-09-814B

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - Neoprene (F9B).           Ref19: AF-09-802B

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - Nitrile (F2P10).        Ref19: AF-09-1077B-9

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - Nitrile (F3B-19).        Ref19: AF-09-1052S-9

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - Nitrite (F4B) With Glycerine - Large.      Ref19: AF-09-1026B-9

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - Nitrite (F4B) With Glycerine - Small.      Ref19: AF-09-810B-9

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - Nitrite (F4B-19).      Ref19: AF-09-824P-9

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - Nitrite (F5B) With Glycerine.          Ref19: AF-09-1027B-9

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - Nitrite (F7B).           Ref19: AF-09-1028B-9

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Johnson Pump Impeller - Nitrite (F8B).           Ref19: AF-09-819B-9

For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.

A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Rule 3 Way Deluxe Panel Float Switches - to operate any bilge pump with an automatic float switch.  Ref:  CW-41                     M55

Rule 3 Way Rocker Panel Float Switch - a black plastic panel with an internally lit 3 way rocker switch.  Ref: CW-44. This is the 24V version