Paint, Varnish & Protection

Hempel / Blakes 750ml High Protect

Hempel's High Protect is a solvent free two component high build epoxy. For use above and below the waterline. An excellent osmosis protection or treatment which can be applied at, and will dry to, a very high film thickness. Can be a substitute for Light Primer where solvent emissions are a consideration. Do not thin.

Colours:

• Cream  - BA-Q136182, HP-35651-24700
  
• Grey - BA-Q136180, HP-35651-13700
  

International Danboline Bilge And Locker Paint 2.5Ltr

A hard wearing and chemical resistant coating for the protection of bilges, lockers and bulkheads from moisture penetration and general wear and tear.

FOR SAFE TRANSPORTATION WE SUPPLY A HANDY WATERTIGHT CONTAINER WITH EACH TIN AT NO EXTRA COST.

A hard wearing and chemical resistant coating for the protection of bilges, lockers and bulkheads from moisture penetration and general wear and tear.

Marine Finish Bilge Paint - 2.5 Litres

A high quality, single component alkyd based bilge and locker paint. This product can be applied directly over GRP/Fibreglass and wood to leave a matt finish.

FOR SAFE TRANSPORTATION WE SUPPLY A HANDY WATERTIGHT CONTAINER WITH EACH TIN AT NO EXTRA COST.

International Interdeck Deck Paint.

Free Boat Paint Guide with full colour charts and NEW formula antifouling. One guige per order. 

Interdeck is a tough polyurethane low sheen deck coating containing a fine mineral aggregate providing a hard wearing, slip resistant surface. It is easy to apply, by brush or roller, on all substrates. 

Watch the experts take you through the do's and don'ts of applying non-slip finishes to your boat.

 

Hempel / Blakes 750ml single pack semi-gloss finish coating with a high resistance to water and oil pregnation, can be used as a primer or topcoat for interior and exterior areas and is especially suited for bilges and lockers

Colours:

• White  HP-5112B-10000   750ml 
• Mid Grey   HP-5112B-11480      750ml

Hemple / Blakes Bilge And Locker Paint 

Hempel / Blakes 2.5 litre single pack semi-gloss finish coating with a high resistance to water and oil pregnation, can be used as a primer or topcoat for interior and exterior areas and is especially suited for bilges and lockers.

Colours:

• White     HP-5112B-10000
• Light Grey     HP-5112B-19500
• Mid Grey      HP-5112B-11480

Durable coating for deck areas, contains fine granules for a non-slip finish. Easy to apply straight onto substrate. (Use suitable primer on previously uncoated surface).

Colours:

• White HP-56251-10000 
• Pale Cream  HP-56251-22210
• Light Grey  HP-56251-19500
• Mid Grey  HP-56251-11480 
• Navy Blue  HP-56251-30100

Hemple / Blakes Anti-Slip Pearls.  Ref18:  HP-69070

Anti-Slip Pearls can be added to all types of paint where a non-slip surface is required.  Mix with Hempel's topcoat and varnishes to obtain non-slip finishes on decks and surfaces where required.

For addition to International Paint gloss finishes and varnishes to provide a non-slip surface. Non-slip Additive is effectively colourless when mixed into paint, so no change in shade should be observed.

1 sachet per 750ml of paint. 20g sachets.

A/F 5-60550

Hempel / Blakes 2.5 Litre High Protect

Hempel's High Protect is a solvent free two component high build epoxy. For use above and below the waterline. An excellent osmosis protection or treatment which can be applied at, and will dry to, a very high film thickness. Can be a substitute for Light Primer where solvent emissions are a consideration. Do not thin.

Colours:

• Cream  - BA-Q136181, HP-35651-24700
  
• Grey - BA-Q136179, HP-35651-13700