Vetus

VETUS exhaust hoses have Lloyd's approval and meet the requirements of SAE J 2006.
Exhaust hose hoses with an internal diameter of up to 6" inclusive
SLANG76 (76mm internal diameter)

Quantity 1 = 1 metre. quantity 2 =2 metres and so on

Joystick Control Panel with Time Delay BPJE

ABC-BPJE

Touch Control Panel with Time Delay

ABC-BPSE

Bow Thruster 95kgf 185mm Tunnel

ABC-BOW9512

Connection cable for Vetus Bow Thrusters/control panels.

• (ABC-BP29) connection cable-6 metre £38.81
• (ABC-BP2910) connection cable-10 metre £50.89
• (ABC-BP2916) connection cable-16 metre £65.26
• (ABC-BP2918) connection cable 18 metre £76.19
• (ABC-BP2920) connection cable 20 metre £79.35

Made of plastic, to be cut off to the required hose diameter. Ideally suited for installation of a VETUS exhaust assembly to an existing engine

ABC-HA1338

Made of plastic, to be cut off to the required hose diameter. Ideally suited for installation of a VETUS exhaust assembly to an existing engine

ABC-HA3060

VETUS exhaust hoses have Lloyd's approval and meet the requirements of SAE J 2006.
Exhaust hose hoses with an internal diameter of up to 6" inclusive

SLANG30 (30mm internal diameter)

Vetus air vevt v. Air vent suitable for hoses of  13mm, 19mm, 25mm and 32mm internal diameter
Part No AIRVENTV

Bow Thruster 25kgf 110mm Tunnel

ABC-BOW2512

Vetus exhaust muffler. for exhaust hose of 40mm, internal diameter. This muffler creates additional mixing of the water inside the exhaust line, which results in an even better noise reduction. The construction of the muffler causes almost no resistance to the free flow of the exhaust gases.

DEMPMP40 £87.98

All VETUS cooling water strainers are provided with a transparent cover, allowing easy inspection of the filter without dismantling. the cleaning of the filter will take only 30 seconds. Due to the large active surface however, the filter seldom needs to be cleaned.

FTR140/13 (13mm hose connection) £71.30

VETUS TRC40PV The exhaust hose can be fitted direct to these transom connections without the need for a connector. Made of Plastic.

These engine mountings are especially designed for 3-cylinder marine diesel engines.

KSTEUN40

The relatively soft rubber compound of these flexible mountings fulfils precisely the requirements of light-weight vessels, equipped with a modern 3-cylinder marine diesel engine, with regard to the insulation of vibrations. The rubber elements are especially shaped to create the optimum in vibration dampening. The VETUS flexible engine mounting type K40 features internal buffers, which limit the engine movement when started or stopped and it is also secured against overload and shearing off.

Suitable for hose 30mm, Provided with a drain plug for winter storage.
Capacity 0.6 gal.

ABC-WLOCKLP30

VETUS exhaust hoses have Lloyd's approval and meet the requirements of SAE J 2006.
Exhaust hose hoses with an internal diameter of up to 6" inclusive
SLANG40 (40mm internal diameter)

Quantity 1 = 1 metre. quantity 2 =2 metres and so on

Vetus Air vent suitable for hoses of 13mm, 19mm, 25mm and 32mm internal diameter.
Model H supplied complete with a skin fitting, hose clamps and 12 ft. of hose.
Part no AIRVENTH

Bow Thruster 35 Kgf 150MM Tunnel

ABC-BOW3512

Vetus exhaust muffler.for exhaust hose of 45mm internal diameter. This muffler creates additional mixing of the water inside the exhaust line, which results in an even better noise reduction. The construction of the muffler causes almost no resistance to the free flow of the exhaust gases.

DEMPMP45 £87.98

All VETUS cooling water strainers are provided with a transparent cover, allowing easy inspection of the filter without dismantling. the cleaning of the filter will take only 30 seconds. Due to the large active surface however, the filter seldom needs to be cleaned.

FTR140/16 (16mm hose connection) £71.30

VETUS TRC45PV The exhaust hose can be fitted direct to these transom connections without the need for a connector. Made of Plastic.

For smaller engines, up to
appr. 60 kW (8O HP).

KSTEUN50 

For exhaust hose with inside diameters of 40m internal diameter. Provided with a plug for draining during winter time. The inlet conneciton of these 3 models will revolve through 360°, which greatly facilitates the installation of the exhaust assembly. There is another, even larger, waterlock for 2" I.D. hose which is recommended for assemblies with longer length exhaust tubing.

VETUS exhaust hoses have Lloyd's approval and meet the requirements of SAE J 2006.
Exhaust hose hoses with an internal diameter of up to 6" inclusive

SLANG45 (45mm internal diameter)

Bow Thruster 55kgf 150mm Tunnel.

ABC-BOW5512A

Vetus exhaust muffler.for exhaust hose of 50mm internal diameter. This muffler creates additional mixing of the water inside the exhaust line, which results in an even better noise reduction. The construction of the muffler causes almost no resistance to the free flow of the exhaust gases.

DEMPMP50 £87.98

All VETUS cooling water strainers are provided with a transparent cover, allowing easy inspection of the filter without dismantling. the cleaning of the filter will take only 30 seconds. Due to the large active surface however, the filter seldom needs to be cleaned.

FTR140/19 (19mm hose connection) £71.30

VETUS TRC50PV The exhaust hose can be fitted direct to these transom connections without the need for a connector. Made of Plastic.

For smaller engines, up to
appr. 60 kW (8O HP).

KSTEUN75 

For exhaust hose with inside diameters of 45m internal diameter. Provided with a plug for draining during winter time. The inlet conneciton of these 3 models will revolve through 360°, which greatly facilitates the installation of the exhaust assembly. There is another, even larger, waterlock for 2" I.D. hose which is recommended for assemblies with longer length exhaust tubing.

VETUS exhaust hoses have Lloyd's approval and meet the requirements of SAE J 2006.
Exhaust hose hoses with an internal diameter of up to 6" inclusive

SLANG51 (51mm internal diameter)

Quantity 1 = 1 metre. quantity 2 =2 metres and so on

Bow Thruster 60kgf 185mm Tunnel

ABC-BOW6012

All VETUS cooling water strainers are provided with a transparent cover, allowing easy inspection of the filter without dismantling. the cleaning of the filter will take only 30 seconds. Due to the large active surface however, the filter seldom needs to be cleaned

FTR330/25 (25mm hose connection)

VETUS TRC60PV The exhaust hose can be fitted direct to these transom connections without the need for a connector. Made of Plastic.

For smaller engines, up to
appr. 60 kW (8O HP).

KSTEUN100 

For exhaust hose with inside diameters of 50m internal diameter. Provided with a plug for draining during winter time. The inlet conneciton of these 3 models will revolve through 360°, which greatly facilitates the installation of the exhaust assembly. There is another, even larger, waterlock for 2" I.D. hose which is recommended for assemblies with longer length exhaust tubing.

VETUS exhaust hoses have Lloyd's approval and meet the requirements of SAE J 2006.
Exhaust hose hoses with an internal diameter of up to 6" inclusive

SLANG57 (57mm internal diameter)

Quantity 1 = 1 metre. quantity 2 =2 metres and so on

Bow Thruster 75kgf 180mm Tunnel

ABC-BOW7512

All VETUS cooling water strainers are provided with a transparent cover, allowing easy inspection of the filter without dismantling. the cleaning of the filter will take only 30 seconds. Due to the large active surface however, the filter seldom needs to be cleaned

FTR330/32 (32mm hose connection)

VETUS TRC75PV The exhaust hose can be fitted direct to these transom connections without the need for a connector. Made of Plastic.

These Vetus flexible engine mountings are suitable
for marine diesel engines In the power range
between 30 KW and 125 KW (40 HP -170 HP

HY100 

Sometimes, notably in the case of sailing yachts, the exhaust line is so long that an extra large waterlock is needed to prevent the large volume of water in the line from running back into the engine once it has been stopped. VETUS waterlocks type LSG and LSS are the ideal solution.

For use with 41mm, 46mm or 51mm internal diameter hose.

Capacity 2 Gallons

• ABC-LSS40A £223.10
• ABC-LSS45A £223.10
• ABC-LSS50A £223.10

VETUS exhaust hoses have Lloyd's approval and meet the requirements of SAE J 2006.
Exhaust hose hoses with an internal diameter of up to 6" inclusive

SLANG60 (60mm internal diameter)

Quantity 1 = 1 metre. quantity 2 =2 metres and so on

Vetus exhaust muffler.for exhaust hose of 60mm internal diameter. This muffler creates additional mixing of the water inside the exhaust line, which results in an even better noise reduction. The construction of the muffler causes almost no resistance to the free flow of the exhaust gases.

DEMPMP60 £87.98

All VETUS cooling water strainers are provided with a transparent cover, allowing easy inspection of the filter without dismantling. the cleaning of the filter will take only 30 seconds. Due to the large active surface however, the filter seldom needs to be cleaned

FTR330/38 (38mm hose connection)

VETUS TRC90PV The exhaust hose can be fitted direct to these transom connections without the need for a connector. Made of Plastic.